無料 · Free download
Every strip, cut at the same angle.
Kumiko falls apart at the joints. One strip pared a degree off and the whole lattice fights you. This jig holds the strip so the chisel can only go one way.
It's the jig I print for myself. Take it.
- 一The jig bodyHolds a strip at 67.5° and 45°, the two angles most kumiko patterns live on.
- 二The stopperSets your strip length so cut forty matches cut one.
- 三Print settings and a how-toMaterial, walls, orientation, and how to actually hold the chisel.
Send it to me
One field. The files download straight away.
It's yours.
The download should have started. If it didn't, here it is.
Download the packPrint it in PLA or PETG at 0.20 mm, three walls, no supports. Full notes are in the README inside the zip.
What you're printing
Default sizing. If your strips are a different width, the customizer rebuilds it to your numbers, also free.
- Cut angles
- 67.5° · 45°
- Jig length
- 177 mm
- Jig height
- 36 mm
- Strip width
- up to 12.7 mm
- Strip thickness
- up to 8 mm
- Parts
- body + stopper
- Material
- PLA or PETG
- Layer height
- 0.20 mm
- Supports
- none