The base grid of every kumiko panel is rows of half-lap notches, all at identical spacing and identical depth. The Gang Station saws a whole pack of strips at once: strips gang flush in a tunnel, paired saw slots guide the blade at your exact pattern pitch, and the depth lives in the slot floors — the blade lands on them and physically stops at 1/3, 1/2, or 2/3 depth. The stepped holder staggers the pack so station 1 lands one pitch from every strip’s own end, and a printed wedge locks everything. No screws, no inserts, no measuring. The STL set is free. Or order it printed to your spec.
Every STL free · printed to order in tough PETG & posted by a one-person workshop.
Gang station · fixed-pitch system
Live preview 組手
—Pitch
5Stations
—Gang
—Depths
Drag to orbit · scroll to zoom
Preparing the studio
Your device can’t show the live 3D preview, but the configurator still works. Set your sizes in the panel, then download the STL set or order the printed system.
Depth stops are cut into the slot floors · vertical 1/3, crossing 2/3 & 1/2 · printed to order in dimensionally-stable PETG.
Made to order 承ります
Every notch identical. By construction.
The saw can only land where the slots let it, and can only stop where the floors catch it. Pitch, depth and fit are printed into the jig — nothing to set, nothing to drift.
Made to order, in PETGDimensionally-stable print, posted from a one-person workshop, usually within 7 to 10 business days.
The full setVertical tunnel, crossing tunnel, stepped holder and locking wedge — zero hardware, the wedge does the clamping.
What it makesThe half-lap base grid behind every kumiko panel, a whole pack of strips per pass.
Your gang station仕様書
Est. filament—
Est. price—
Estimated for a PETG print of the full set. The price updates as you design.
Four files — two tunnels, holder, wedge. Verified watertight before saving.
Founding-customer fit check included · secure checkout · printed to order.
